WCB Valve vs WCC Valve: Comprehensive Material Comparison for Industrial Applications
Common valve types manufactured with WCB and WCC materials
ASTM Material Specifications: WCB vs WCC
When evaluating valves, the WCB Valve vs WCC Valve: discussion becomes vital, especially in terms of material characteristics and their respective functionalities across various industrial sectors.
Visual comparison of WCB (left) and WCC (right) cast steel valve bodies
Both WCB and WCC are grades specified under ASTM standards for carbon steel castings used in valve manufacturing. Understanding their fundamental definitions and standards is the first step in making an informed selection.
In the WCB Valve vs WCC Valve: context, understanding chemical composition is essential for engineers and procurement specialists alike.
ASTM A216 Grade WCB Definition
WCB stands for “Weldable Cast Steel with B grading” and is defined under ASTM A216 standard. This specification covers carbon steel castings suitable for fusion welding, intended for high-temperature service. WCB is the most commonly used grade in this standard due to its balanced properties and cost-effectiveness.
ASTM A216 Grade WCC Definition
WCC represents “Weldable Cast Steel with C grading” and is also covered under ASTM A216. It offers higher manganese content and improved mechanical properties compared to WCB, making it suitable for more demanding applications where higher yield strength is required.
Chemical Composition Comparison
| Element | WCB (%) | WCC (%) | Key Difference |
| Carbon (C) | 0.30 max | 0.25 max | WCC has lower maximum carbon content |
| Manganese (Mn) | 1.00 max | 1.20 max | WCC allows higher manganese content |
| Phosphorus (P) | 0.04 max | 0.04 max | No difference |
| Sulfur (S) | 0.045 max | 0.045 max | No difference |
| Silicon (Si) | 0.60 max | 0.60 max | No difference |
| Residual Elements | 1.00 max total | 1.00 max total | No difference in total allowance |
The key chemical difference lies in the manganese-to-carbon ratio. For WCB, for every 0.01% reduction of carbon below the maximum (0.30%), the manganese can be increased by 0.04% without exceeding 1.28%. For WCC, the same carbon reduction allows manganese to increase without exceeding 1.40%, resulting in higher overall strength.
Understanding the Differences: WCB Valve vs WCC Valve:
By examining the WCB Valve vs WCC Valve: differences in chemical properties, we can better understand their suitability for various applications.
Mechanical Properties Comparison
Laboratory tensile testing of WCB and WCC material samples
The mechanical properties of valve materials directly impact their performance in various operating conditions. WCB and WCC have distinct mechanical characteristics that make them suitable for different applications.
Moreover, the WCB Valve vs WCC Valve: performance metrics aid in determining the best fit for operational needs.
Tensile and Yield Strength
| Property | WCB | COE | Avantage |
| Tensile Strength | 70-95 ksi (485-655 MPa) | 70-95 ksi (485-655 MPa) | Equal |
| Yield Strength | 36 ksi (250 MPa) min | 40 ksi (275 MPa) min | COE |
| Élongation | 22% min | 22% min | Equal |
| Reduction of Area | 35% min | 35% min | Equal |
WCC’s higher yield strength (40 ksi vs 36 ksi) is its primary mechanical advantage over WCB. This higher yield strength means WCC valves can withstand greater pressure before permanent deformation occurs, making them more suitable for high-pressure applications.
Thus, when considering high-pressure applications, the WCB Valve vs WCC Valve: evaluation becomes crucial for selecting the appropriate material.
Hardness and Impact Resistance
Both materials typically have Brinell hardness values between 140-170 HB, with WCC often testing slightly higher due to its increased manganese content. The impact resistance of both materials is adequate for standard industrial applications, though neither is specifically designed for extreme impact conditions.
Brinell hardness testing on valve material sample
Temperature and Pressure Service Ranges
Operating temperature and pressure capabilities are critical factors in valve selection. WCB and WCC materials have different performance characteristics under various conditions.
Temperature Range Comparison
| Matériel | Minimum Temperature | Maximum Temperature | Optimal Range |
| WCB | -29°C (-20°F) | 425°C (800°F) | -18°C to 400°C (0°F to 750°F) |
| COE | -46°C (-50°F) | 425°C (800°F) | -40°C to 400°C (-40°F to 750°F) |
WCC offers better low-temperature performance compared to WCB, making it more suitable for colder environments. Both materials have similar upper temperature limits, with performance degradation occurring beyond 425°C (800°F).
Notably, the WCB Valve vs WCC Valve: analysis reveals significant differences in their operational temperature ranges.
WCB and WCC valves installed in high-temperature industrial pipeline
Pressure Class Capabilities
Due to its higher yield strength, WCC valves typically offer better performance in higher pressure class applications. However, both materials are commonly used across standard pressure classes:
Both materials offer unique advantages in the context of the WCB Valve vs WCC Valve: performance comparison.
- Class 150 (PN 20): Both WCB and WCC suitable
- Class 300 (PN 50): Both WCB and WCC suitable
- Class 600 (PN 100): Both suitable, WCC preferred for upper range
- Class 900 (PN 150): WCC generally preferred over WCB
- Class 1500 (PN 250) and above: WCC strongly preferred over WCB
For applications requiring both high pressure and low temperature, WCC provides a clear advantage over WCB due to its superior yield strength and better low-temperature performance.
Corrosion Resistance Properties
Laboratory corrosion testing of valve materials
Both WCB and WCC are carbon steel materials with similar corrosion resistance characteristics. Neither offers exceptional corrosion resistance without additional protection.
Corrosion Resistance Limitations
Corrosion Resistance Strengths
- Both materials perform adequately in non-corrosive environments
- Both can be treated with protective coatings to enhance corrosion resistance
- Both handle dry gases and non-corrosive petroleum products well
- WCC’s slightly different composition may offer marginally better resistance in some environments
Corrosion Resistance Limitations
- Neither material is suitable for highly corrosive media without protection
- Both are susceptible to general atmospheric corrosion
- Neither performs well in seawater or high-chloride environments
- Both require protective measures in acidic or alkaline environments
Protective Measures
For applications where corrosion is a concern, both WCB and WCC valves typically require additional protection:
- Surface treatments (painting, powder coating)
- Electroplating (nickel, chrome)
- Chemical treatments (phosphating, bluing)
- Cathodic protection systems for buried or submerged applications
For highly corrosive environments, alternative materials such as stainless steel (CF8, CF8M) or specialized alloys may be more appropriate than either WCB or WCC.
In terms of corrosion resistance, the WCB Valve vs WCC Valve: discussion is imperative, especially for industries prone to environmental challenges.
Industrial Applications and Selection Guidelines
Industrial applications for WCB and WCC valves across various sectors
WCB and WCC valves are used across numerous industries, but their specific properties make them more suitable for certain applications.
Typical Applications by Industry
| Industry | WCB Applications | WCC Applications | Preferred Material |
| Oil & Gas | General pipeline service, moderate pressure applications | High-pressure applications, low-temperature environments | WCB for standard conditions, WCC for extreme conditions |
| Power Generation | Standard steam systems, water circulation | High-pressure steam systems, critical service | WCB for most applications, WCC for critical service |
| Chemical Processing | Non-corrosive chemical service, general purpose | Higher pressure chemical service, specialized applications | Application-specific, often neither (stainless preferred) |
| Water/Wastewater | General water service, standard pressure | Rarely used due to cost considerations | WCB for most applications |
| Exploitation minière | General service, slurry applications with liners | High-pressure applications, cold climate operations | WCB for standard applications, WCC for extreme conditions |
Valve Types Commonly Manufactured with WCB and WCC
Gate Valves
Both WCB and WCC are commonly used for gate valve bodies. WCC is preferred for higher pressure classes and colder environments.
Vannes à soupape
WCB is common for standard service globe valves, while WCC is preferred for critical service and higher pressure applications.
Clapets anti-retour
Both materials are suitable for check valves, with material selection typically based on pressure class and temperature requirements.
Vannes à bille
WCB is widely used for standard ball valves, while WCC may be specified for higher-pressure ball valve applications.
Butterfly Valves
WCB is the predominant material for butterfly valve bodies due to cost considerations and adequate performance.
Plug Valves
Both materials are used in plug valve manufacturing, with selection based on specific service conditions.
Common valve types manufactured with WCB and WCC materials
Cost Comparison and Maintenance Considerations
Cost and maintenance requirements are important factors in the valve selection process. WCB and WCC have different cost implications and maintenance needs.
Cost Comparison
Relative cost comparison between WCB and WCC valve materials
| Cost Factor | WCB | COE | Difference |
| Raw Material Cost | Lower | 5-15% higher | WCC costs more due to tighter chemistry control |
| Manufacturing Cost | Standard | Slightly higher | WCC may require more controlled casting processes |
| Testing & Quality Control | Standard | More rigorous | WCC often requires additional testing |
| Overall Valve Cost | Lower | 8-20% higher | WCC valves command premium pricing |
WCB valves are generally more cost-effective and widely available, making them the preferred choice when their performance characteristics meet application requirements. The premium cost of WCC is typically justified only when its superior yield strength or low-temperature performance is necessary.
For engineers, the choice between the two often hinges on the WCB Valve vs WCC Valve: analysis of cost versus performance.
Maintenance Considerations
Both WCB and WCC valves have similar maintenance requirements:
- Regular inspection for corrosion, especially in outdoor installations
- Periodic lubrication of moving parts
- Maintenance of protective coatings where applied
- Checking for leakage at connections and seals
- Replacement of soft parts (seals, gaskets) according to manufacturer schedules
From a maintenance perspective, there is little difference between WCB and WCC valves. Both materials have similar durability and service life when properly maintained and operated within their design parameters.
Decision-Making Guidelines for Engineers
Decision flowchart for WCB vs WCC valve selection
When selecting between WCB and WCC valve materials, engineers should consider several key factors to ensure optimal performance and cost-effectiveness.
Key Selection Criteria
Recommended Selection Process
- Evaluate temperature requirements: If operating below -29°C (-20°F), WCC is the better choice. For standard temperatures, either material is suitable.
- Assess pressure class needs: For higher pressure applications (Class 900 and above), WCC’s superior yield strength provides an advantage.
- Consider application criticality: For critical service where failure consequences are severe, WCC’s superior mechanical properties may justify the additional cost.
- Analyze corrosion environment: If corrosion is a significant concern, consider whether either material is appropriate or if alternative materials like stainless steel should be considered.
- Review budget constraints: If cost is a primary concern and the application falls within WCB’s performance envelope, WCB offers better value.
Engineers reviewing valve specifications for material selection
Need Expert Guidance on Valve Material Selection?
Our engineering team can help you determine whether WCB or WCC is the optimal choice for your specific application. Contact us for a personalized consultation and detailed technical specifications.
Request Technical Consultation
Conclusion: Making the Right Choice Between WCB and WCC
Both WCB and WCC valve materials offer reliable performance for industrial applications, but their specific properties make them better suited for different scenarios. WCB provides cost-effective performance for standard operating conditions, while WCC offers enhanced yield strength and better low-temperature performance at a premium price.
When selecting between these materials, engineers should carefully evaluate the specific requirements of their application, including temperature range, pressure class, and criticality of service. In many standard applications, WCB provides sufficient performance at a lower cost, making it the more common choice. However, for applications with higher pressure requirements or lower operating temperatures, WCC’s superior mechanical properties justify its higher cost.
By understanding the key differences between WCB valve vs WCC valve materials outlined in this guide, engineers and procurement specialists can make informed decisions that balance performance requirements with cost considerations, ensuring optimal valve selection for their specific industrial applications.
Ultimately, understanding the key differences between WCB Valve vs WCC Valve: materials outlined in this guide will allow for better decision-making in valve selection.
